|
|
 |
|
|
TOX?/SUP>-Robot Tongs/Machine Tongs
with hydraulic drive
Type: CRH 03.75
Fmax = 75 kN at 250 bar
Interference contour dimensions
Flat die plate Flat,
offset die Optional equipment available
Model 40:
attachable directly onto tong frame.
Model 42:
compensating slide with stroke adjustment and pneumatic cylinder.
Large stroke for moving clear of the raised TOX?/SUP>
point and raised parts of the component. Final position monitoring
fitted. With self-centering (special equipment) without force
influence on piecepart.
Auto-centering:
compensating slide with auto-centering. Minimum load on piece
part, no relative movement of piece part. Punch or die is lowered
onto the component and pulls the tong into the TOX?/SUP>
joining position. Tong move out with the return stroke of the
raised TOX?/SUP> point.
Special models:
Stroke up to 200 mm from standard programme.
Pressing force can be increased at any time.
Special shackle upon request.
Model 40
Model 42
Drive:
Type CRH by pneumatic-hydraulic
unit.
TOX?/SUP>-point diameter:
Type CRH 03.75
Point diameter 3, 4, 5, 6, 8, 10 mm
Total sheet metal thickness approx. 5 mm
Weight:
CRH approx. 16 kg
Items supplied:
Shackle, hydraulic cylinder respectively TOX?/SUP>-Powerpackage,
stripper. Slide according to model. Pneumatic-hydraulic
unit and TOX?/SUP> tools not included.
|
|
